Περιγραφή
Tech-Protetect Glass UV is the highest quality tempered glass that will provide exceptional protection for your device's screen. Thanks to UV application technology, the glass adheres perfectly to the surface, eliminating the formation of air bubbles and ensuring full transparency and touch sensitivity.
9H hardness effectively protects the screen against scratches, impacts and other mechanical damage, and the special UV-cured glue guarantees perfect fit and stability, even on curved screens.
The glass provides full screen coverage, from edge to edge, without affecting image quality or color reproduction, and its smooth surface allows the touchscreen to remain fully responsive.
Tech-Protetect Glass UV is the perfect solution for people looking for reliable screen protection while maintaining the aesthetics and functionality of the device.
* We do not recommend using 3D glass without any housing.
** We do not recommend using glass if the housing overlaps too much over the edges of the screen, there is a risk of prying it off.
***The functionality of the fingerprint reader in the screen may be slightly impaired in the case of an installed coating in the form of foil or glass. The fingerprint reader is not fully developed for additional coatings.
INSTALLATION INSTRUCTIONS:
1) Start the installation in the bathroom right after taking a bath - the water vapor will absorb all the dust from the atmosphere and it will not interfere with the installation.
2) Thoroughly clean and degrease the screen surface, then use a dry cloth to polish it to a shine.
3) Use the tape from the kit to seal the speaker.
4) Connect the UV lamp using the Type-C cable to a power source.
5) Pour the liquid into the center of the device.
6) Install the glass as evenly as you can, you can also correct this step before the surface hardens when the liquid is on the screen together with the glass.
7) If an air bubble has appeared, use a bank card and gently push it out of the glass, this step is done before hardening.
8) Using a UV lamp, harden the glass along the center in five places for 15 seconds and then around the edges for 10 seconds.
9) Clean your phone of any remaining hardened glue.
10) If your device has a fingerprint reader in the screen, remember to remove and re-add your fingerprint after installing the glass on the screen.
11) Enjoy a job well done!
PRODUCT FEATURES:
- 100% Original
- Packed in original packaging
- 0.3mm thick tempered glass
- Scratch resistance 9H
- Equipped with an oleophobic coating
- Leaves no trace after disassembly
- Dimensions: 157 x 72mm
THE SET INCLUDES:
2 x Tech-Protect Glass UV
1 x UV Lamp (without Type-C cable)
2 x Tube of glue
2 x Installation kit
